Many vehicle manufacturers are now incorporating CAN Bus wiring
systems into their current models. CAN Bus wiring was originally
designed by Bosch to link electrical control systems together to
form a network of information around the vehicle. CAN Bus is
replacing the conventional wiring as it is less bulky and offers
manufacturers a cost saving on running copper wire throughout a
vehicle, however this does make it increasingly difficult to
retrofit products to modern vehicles.
The solution is to use a CAN Bus interface
which interprets the CAN Bus data and
translates it into an output which can be
used when installing
aftermarket products such as satellite navigation, cruise
control, taximeters, reversing sensors, security and fleet
management etc.
During the past couple of years SPAL have
invested heavily in developing and
manufacturing a competitively
priced CAN Bus interface that is
reliable and easy to install. As a result we
now have two CAN interfaces available that
are currently compatible with 220+
vehicles.
SPAL CAN interfaces read the
CAN data on a vehicle
and provide a variety of outputs
- making SPAL CAN interfaces the
ideal choice for a wide range of applications.
New vehicle databases can be
written to ICB-1/2 devices using
the SPAL interface software
(which can be downloaded from
the dealer area of our website)
and a connection to a PC using
the supplied USB cable. Using
the SPAL interface software
outputs can be re-configured to
suit individual requirements
(see tables below).
SPAL ICB-1 CAN Bus interface
- cod.35600060
Universal - simple to
install and compatible with 200+
vehicles.
Updatable* - Units never become obsolete.
Using supplied USB
lead you can connect ICB-1 to
your PC and downloads any
future database updates that are
available.
Re-Configure parameters*
- Using the supplied USB lead
you can connect ICB-1 to you PC
to enable individual outputs to
be configured to specific
requirements
(see table below).
If you require
further technical information or would like to
download the SPAL CAN Bus interface software please
contact us for you dealer log in details (trade
only).
SPAL ICB-2 CAN Bus interface
- cod.35600061
Universal - simple to
install and compatible with 220+
vehicles.
Updatable* - Units never become obsolete.
Using supplied USB
lead you can connect ICB-2 to
your PC and downloads any
future database updates that are
available.
Re-Configure parameters* - Using the
supplied USB lead you can
connect ICB-2 to you PC to
enable individual outputs to be
configured to specific
requirements (see table below).
If you require further technical information or would
like to download the SPAL CAN Bus interface software
please contact us for you dealer log in details (trade
only).
New SPAL ICB-7 CAN Bus
interface - cod.35600148
Universal
- simple to install and compatible
with 220+ vehicles.
Updatable*
- Units never become obsolete. Using
supplied USB lead you can connect
ICB-7 to your PC and downloads any
future database updates that are
available.
Re-Configure
parameters* - Using the supplied
USB lead you can connect ICB-1 to
you PC to enable individual outputs
to be configured to specific
requirements
(see table below).
